Customization: | Available |
---|---|
Certification: | ISO9001, CE, NSF |
Salt Rejection Rate: | 99.0% |
Still deciding? Get samples of US$ 1/Piece
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment methods: |
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
---|---|
Support payment in USD |
Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
The 4-inch winder Frp Membrane Housing can hold up to 4 RO Membrane, and the maximum pressure can reach 1200PSI.Because the operating environment of the Frp Membrane Housing system is humid, this brings difficulties to the disassemble work. Here, we will introduce the disassemble method of the Ro Membrane Housing end cap and the use steps of the extractor:
Extractor:
1. Ejection plate 2. Ejection screw 3. Nut 4. Afterburner 5. Allen wrench
Installation:
1. When disassembling the end cap, the pressure in the membrane housing should be fully released.
2. Use the Allen wrench to unscrew the bolts at the membrane housing end cap.
3. If the stopper is loose, take it down. If the stopper cannot be taken down tightly, knock the bearing plate with the tool to loosen the stopper.
4. Screw the ejection screw of the extractor to the end cap permeate port and fix it.
5. Set the ejection plate onto the screw.
6. Screw the round nut to the screw to fix ejection plate.
7. Insert the afterburner into the nut and rotate it clockwise until the membrane housing end cap is out of the sealing area.
8. Remove the extractor from the membrane housing end cap.
9. The membrane housing end cap is disassembled, and the extractor makes your work easier.
4inch end port/lower pressure | 4Inch end port/high pressure | |
Model | W40E300/450 | W40E600/1000/1200 |
Design Pressure | 300/450PSI | 600/1000/1200PSI |
Cyclic Test | 100,000 times | 100,000 times |
Burst Pressure | 6 Times | 6Times |
Element Quantity | 1-4 | 1-4 |
Operating pH Range | pH 3-11 | pH 3-11 |
Operating Temperature | -10ºC-66ºC(14ºF-150ºF) | -10ºC-66ºC(14ºF-150ºF) |
Feed/Concentration Port | 1.5" | 1.5" |
Permeate Port | 1" | 1" |
Recommended by seller